Lang Tools Lang Lock Ring Tool (LNG-)

Prefect fit, no hassles, worked right away. Very satisfied.

Needing to replace the leaking fuel check valve before a long bike trip on a 2012 CVO ROAD GLIDE CUSTOM this was the tool i needed.Having never done this task before I contacted HD service and was again quoted a crazy service price I did some University of YouTube research and found this tool instead of the HD model. The HD tool was anywhere from $200.00 - $90.00 if you could find it as it is always back ordered. It wasn't carried at the HD shop and needed to be special ordered and on Ebay it was also crazy priced.Had this Lang tool delivered with Prime in a day for under $30.00 bucks.Tips:- Discount your battery and the fuel fuse. Follow service manual.- Empty the tank and purge the tank. See the service manual of U of YouTube for this. If not you will make a gas mess.- Make sure the bike is in gear and the kick/jiffy stand is down.- Protect your tanks paint.- Work from the right side of the tank to apply pressure on the bike so you don't pull/push the bike over.- Spray the tabs with a safe lubricant like silicone.- Once you place the tool on the ring tabs press down evenly and slowly turn.- While pushing down apply steady pulling pressure on the handle. Be careful not to use the very end of the hanfle as this tool is made of a hard plastic not metal.- The key is proper placement of the tool, downward pressure, steady pulling of the tool.- Be carefull not to not damage the rubber gasket in the housing after the ring is removed or you will have to order another from HD. If damaged you will have another leak!Like I said this was super easy and saved hundreds of dollars. It took longer to change the fuel check valve and get it reattached to the fuel pump but all in all with prep, installing and clean-up it was an hour in a half job.Just because I was being super careful not to screw anything up.Good luck...#GO FAST DON'T DIE

Easy to use sturdy tool.

Kinda expensive for what it is ....but does the job great with no chance of scratching paint

Its not quite as beefy as it looks. Granted the ring hasn’t been off in 13 years, it flexed a little to much and thought it was going to snap. After spraying the ring with WD, the wrench did its job; then re installing went smoothly. It fit perfectly over the lock ring tabs, and the lever is a decent length for leverage. It does beat using a hammer and punch and risking damaging the tank

Worked perfectly

OK so it's hard plastic or something like that. Made the job very easy to remove the lock ring and reinstall the ring. For the money you can't beat the price. I change my fuel filter every year. This tool you don't need to use a screwdriver or whatever to do the job and worry about running a nice deep scratch on your tank like I've seen other people do it. This just wrap a rag around the tank an one crank and the lock ring is off . Same with installation. If you plan on changing your filter I highly recommend this tool. Lot less than paying a dealer to do it.

This tool worked perfectly to remove the lock ring from my Harley gas tank. Well made and easy to use.

Fits on locking ring perfectly on 2009 FLHTCU. Like it better than using a hammer and punch.

I was very pleased with this tool as it fitted the removable lock ring properly and it did the job perfectly. I am very happy with my purchase.

I liked the service and tool. I use it to replace a fuel filter on a motorcycle.

I used it 3 times and worked well no more chisels and hammer

It undid the lock ring just like butter