ViewSonic PX701-4K 4K 3200 Lumen Home Theater Projector w/ HDR, Auto Keystone, Dual HDMI (Renewed)

I've had this projector for a couple of weeks and so far I am very pleased with it. It's image is bright and sharp and the colors are accurate. It plays 3D content beautifully and uses standard active shutter glasses (none are included). It's not silent but it is not distractingly noisy either. Also there are no light leaks (a problem I had with a previous projector). The focus and zoom are manual and a little stiff. I wish they could be controlled from the remote but no. You can correct for keystone both vertically and horizontally which is very helpful if you can't center the projector precisely. Like most projectors, the internal speaker is fairly useless but it does have one. Besides a headphone jack there is no other audio output. So if your source device does not have an audio output of its own (such as a Fire TV stick), you will be at a loss unless you purchase an HDMI splitter. On the whole, I believe it is a fine projector at its price point and would readily recommend it.

The media could not be loaded. Excellent refurbished projector. I ran it for hours with no diminished picture whatsoever. I also play ps5 on the projector and it beats anything I’ve ever played on as far as lag time and every other category I can think of. Fire tv stick is also amazing with all the prime 4k shows. You do need a good 10 ft to get a full 100 inches, and mine is at around 87-90 inches, but it’s great because it’s mobile. This is a great buy!

Happy with the product. Picture quality is good, supports 4K. Not so happy with zoom… doesn’t zoom much… so far for the distance I used, picture is around 100”

Received via FedEx on Jan 20 at around 3:30pm. Immedietly I took it out of the box and inspected it for any damage or missing parts. All looked excellent, like a brand new projector, so I plugged it into an AC outlet and turned it on to make sure it would at least produce an image and got nothing. So I plugged an HDMI cable into a laptop and into the projector and was then able to turn it on and got some kind of image projected on a wall. It seems the projector is set up to turn on only when there is an HDMI source present. So I shut down the projector and proceeded to remove my old Benq W1070 and mount the ViewSonic in its place. After plugging in the power cord and HDMI cables, I turned it on and got a good clear image on the screen, but inverted because it was ceiling mounted. I found the setting on the remote to invert the image then started to adjust the mount so that the image was centered on the screen correctly when suddenly the projector shut off. No warnings, no heat indicator lights were lit and no fans continued to run like after a normal shutdown. Waited about 5 minutes and was able to restart the projector and make a few changes to some settings when after about 4 minutes, it shut off again. I went through this a couple more times, trying not to move the projector each time, but this last time I had to wait maybe 20 minutes before I could turn it on. However this time since the image was pretty well centered on the screen I thought I’d watch some YouTube videos. I was able to go for maybe a half hour, and without warning, it simply shut off again. Well I’ve had enough, so I unmounted the ViewSonic and re-mounted the Benq and started that up without any problems. Set up the return to ViewSonic and I’ll be driving the it over to the UPS store this morning to have it sent back and get a full refund on it. In the past I’ve had good luck with refurbished electronics from Amazon, but not this time.

Very sharp large projection image. Great contrast. Quiet fan noise.