383EER4004A Washing Machine Inner/Outer Spring Expansion Removal Tool, Suitable for 4986ER0004F/B/G Door Boot,Suitable for LG and Samsung TJTSE-1 1268535, EA3569695, AH3569695,PS3569695-Red

Perfect. Sure I could probably remove with a couple of pliers or something. But I would risk damaging the spring or scratching up my washer. This tools make removing and putting gasket back much much easier. The width is just right. Also same a lot of time. Attach tool and expand spring.

Perfect for removing the dreaded LG/Kenmore door gasket spring.

I decided to remove and replace the front gasket on my LG washer as was getting pretty gross after 10 years. I looked at some YouTube video's and decided to jump in. There is an LG tool that is used to remove and install the inner and outer clamp rings the hold the gasket. LG want's nearly $90 for the tool. Probably a must have if you repair appliances for a living. I saw these style tools from several sellers at a much more reasonable price and decided to order one. The tool itself seems well made, but it is significantly different from the LG tool. The LG tool was designed to allow for installation of the inner spring clamp by grabbing a special hole in the clamp and expanding the spring to pop over a hook to latch in place. As you squeeze the tool the two tongs are brought together to force the spring end onto the hook. This tool operates in reverse. As you squeeze, it expands. It works great to remove and install the outer spring clamp, just put the two tongs into each of the spring loops and squeeze the handle to expand the spring and the ring clamp pops right off. The inner clamp is a different story. Since this tool works by expanding the spring, you have to operate it in that manner and is not easy to use. Some videos show installing clamps place without resorting to removing the front of the washer. There is not much room to work and this tool makes the job even harder. After trying quite a few times, I gave up and removed the front of the washer. This involves removing the top and the control panel. Even more work in my case as the washer and dryer are stacked and not easy to access. Still, it turned out its not that difficult and you have much better access to the inner clamp such that I had no trouble using the tool to re-hook the inner clamp. If you are more dexterous than me, you may be able to avoid removing the door, but I would recommend doing so. I would have given the tool 5 stars if it operated exactly like the LG tool, but for the price, its a great value.

This tool was handy and works as stated. I used it to replace the o ring on the washer machine. It's great.

This is a tool used when changing a door seal on a front-load washing machine. Those gaskets/seals get very nasty, moldy, mildewy, and smelly if not cleaned after nearly every load of clothes. Most folks are not going to do that. At some point years later, when you can't stand looking at it any longer, just buy a new one and change it. If you are a do-it-yourselfer as I am, this is a minor degree of difficulty kind of job, as I rate it - IF you have this tool. You'll search YouTube to find out how to do it and see many different opinions. Some say to disconnect everything (for safety) and take the front panel off ( to make it easier). Others even suggest taking off the back panel too, which means moving the machine away from the wall. YOU DO NOT HAVE TO DO ANY OF THAT. Simply open the door and do the job. I changed this part in 30 minutes with this tool which makes removing 2 metal rings with spring connectors that secure and seal the boot to the front opening. Lubricating the seal with dish soap inside the 2 folds does help to seat the seal in place. Buy this tool, so glad I did. As the saying goes - the right tool for the job!

just the tool for the job, only way to change front load gasket!

My husband ordered these to repair our washer, but him and his friend ended up just having to use their bare hands to get it done because these did not work out after all. We had to return them for a refund.

Tool works great for the front spring. However, the back spring is different and the tool does not work. It does not expand enough and even if it did, the back spring is a hook so you will have to figure out a different method of taking it off and putting it back on. I am sure this tool works for most washers, but my LG washer must have a unique spring set up.