Fitcamx 4K Dash Cam Suitable for Porsche Macan 95B Panamera 970 Cayenne 958 92A E2 (Model B), OEM Factory Look, 2160P UHD Video, Built-in WiFi & APP, Loop Recording, G-Sensor, Easy to Use, 64GB Card

This dashcam exceeded my expectations. It is stealth (you don't know it is there), clean looking, no wires shown, OEM like, and has a cellphone app to download video/picture. The installation is not easy, but not too difficult if you know what you doing, since you don't want to damage any pieces removed, so do take your time for it. The instruction video included is adequate, but needs a few more details, especially where to use the pry tool to remove these overhead plastic covers. 1. To remove front large cover next to reading light is easy, just pry and push forward (towards windshield). 2. To remove the smaller cover for rain censor is also relatively easy, just pry the mid section (with securing tab), it will pop loose. 3. To remove the mirror from its base is hard, you need to use some force, CCW twist the mirror very hard to dislodge it. 4. To remove the mirror back cover is easy, once the mirror is dislodged from its base, just slightly expand two side's plastic cover it will pop out. 5. Locate the 3 pin wire connector (power supply) and pull it out from the base connector. 6. Connect dashcam's female connector with this 3pin connector (power supply), and then connect the 3pin connector (male) from the dashcam to the base connector (supply power to rain censor). 7. Replace the OEM mirror back cover with the dashcam (integrated with the mirror back cover) and attach/click the dashcam to the mirror. 8. Re-attach the mirror with the dashcam back cover to the rain censor base, CW twist it on, just hand tight is enough. 9. Test the dashcam to ensure you have power before re-attach the small cover and the large cover with reversed removal steps above, and you are DONE. This is a great product design idea. It integrates dashcam with the rain sensor/rear view mirror back cover, so that no wires dangling around, very OEM look. It has good video quality, easy to download video clips, either with an app via Wifi connection, or just pop out micro SD card and insert it into provided USB C card reader, very convenient. It does take some time to install, but it is well worth, as you get a clean OEM look dashcam and stealth. A well earned 5-star product.

Love the 4K resolution, OEM appearance, and no need to route power cables to a fuse panel. 4 stars instead of 5 because Fitcamx web site did not have correct installation video for my model Porsche Cayenne (Model A Fitcamx). Video with written instructions with photos would be very helpful.Installation took 1.5-2 hours, but I was very careful in removing the three trim pieces (one with air bag lights, one transition piece to the rear view mirror mount, and one that covers the bottom of the rear view mirror mount). Camera kit came with metal prying tools for removing trim, but I ordered a set of plastic tools from Amazon (GOOACC 5 piece set) that reduces the risk of getting scratches.Most challenging part of installation was removing and reinstalling the rear view mirror bracket to the rain sensor mount. It was easy, however, once I realized that it removes easily with about 20 degree counterclockwise twist and goes back on with a similar 20 degree offset to press it on, and then rotate clockwise to lock it in place. I ended up removing and reinstalling it a few times as I determined the best way to tuck and route the cables.Camera operation is simple and starts automatically when the car is started. The camera generates an individual video file for each minute of operation, so you'll end up with many files to sort through or download if you want to review a trip. I'd prefer the camera generated a larger file (5 or 10 minutes duration). The camera's wifi is 2.4 Ghz, so downloading takes some time to your cell phone using the Fitcamx app. Much faster to simply remove the cameras sd card and download directly to your computer.All-in-all, very happy with the purchase and would definitely recommend if for those Porsche fanatics wanting an OEM look.

I LOVE this camera! I was looking for a neater way to install my Vantrue which had a cable that hung down, and I didn't want that. Then I came across this camera and I loved the way it looked, and it seemed very easy to install.Full disclosure, I have rebuilt many a car, so I was more familiar with how to install things. I watched their installation video several times, and had my phone out there in the car. Everything was going fine, except the first plastic panel would not release as shown. So of course it broke! I could have fixed it with some CA glue and fiberglass cloth, but it being a new Porsche, I wanted it perfect inside and out, so, $38.00 and two days later, I had the new bezel. It really didn't cost me anything because the staff at Arlington Porsche gave me some really nice swag. A mug, keychain and a book. So I actually came out ahead!I could not find the plug they were referring to, so I emailed them, and they were very prompt in their reply, and told me where to look. Once I found the plug, it went in right away. Powerup and setup went as shown in the instructions. I linked it to my Android S24 Ultra no problems and setup the features I wanted. Video quality is OUTSTANDING!I got the front only camera, as I didn't want to deal with running that cable. Maybe one day they will have a BT camera?Thanks again for the help!