Mini Milling Machine Work Table Vise Portable Compound Bench X-Y 2 Axis Adjustive Cross Slide Table , for Bench Drill Press 12.2inches-3.54" (310mm 90mm)

The unit was a delivered with perfectly adjusted gives. There was no need for any adjustment at all. Everything works perfectly in two planes. The only issue I had was the slight adjustment to one of the screws in a handle so it would spin more freely. I don't think you'll find another unit like this in this price range.

Used on my drill press, it’s not a full blown heavy duty “machine shop” milling table, but works for small simple projects. You need to tighten up the slides as they are loose. Adjustments for such are provided.

This thing works very well. Only reason its not 5stars is the missing bolt. Made it a little difficult to hold things down but after finding my own hardware it works better than most people say.

Its very light weight, I was suprised how light it was out of the box it will hold a bigger peice than you can do without adjusting the placement,set up is pretty easy . I had to make the hold downs for to secure it to the table on my drill press.for what I use it for it is adequate but if you need to be very precise you will be frustrated because the the top table moves side to side and up and down.At first the wheels move smooth untill you start the cut then they catch and are sticky and make it a pain to follow even a straight line. So it is not accurate at all. All in all it is a ok priduct if you just need to make something fit together

item was delivered without incident to container and item was better than I had expected for quality of construction.

This unit met my needs - to be able to drill lines in a row so I could cut out a rectangular hole in a plastice cover. Placing the unit on a Dremel Drill Stand allowed me to drill multiple lines in a row so I could dut the waste between out. This unit is accurate enough to achieve a straight line of holes. The only downside was initial binding due to a cover over the cross feed screw sticking up over the crossfeed screw and interfering. Accurate enough for my work - I could NOT do this free-hand.

I tried to cheap out, and this looked great on the screen. Very disappointing in reality.The actual unit is sloppy, holds no tolerance, and rattles/wobbles in every direction. Without rebuilding the internal mechanism and custom making the brass threaded inserts to a much higher spec, this will not work for almost any use.I talked to CS and they said that that's just how this unit is. The more precise unit was far more expensive and was outside my budget. Sent this one back.

The items is a bit loose. There are adjustments, but they are not effective. After using it for a while, the threaded rod for one axis came out rendering the unit unusable. I managed to repair it. But its still not in good shape.Very cheap, worth even less.