BACHIN Upgrade Version Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill

This piece 🧩 is just perfect u can tie with screw or double tape flow is also good and u can manage oil and air flow both

Sencillo funcional y de buena calidad,

Great delivery and good price

I am so extremely glad that I did not get a lesser quality one, I absolutely love it!! And here's a wonderful tip: I took painters tape and taped the side that I wanted mounted, and tapped the surface that I wanted it to be mounted to, and I covered both the surface of the back of the tape on both the unit and the mounting surface with some dollartree supper glue and stuck the tape together to eachother. Don't kid yourself thinking this isn't the greatest idea because I do this on cnc machine to mount a piece of aluminum stock to the work table and machine parts and they hold really tight and when im done; I just pry up one corner of the finished part and peel the tape off and all surfaces are protected check it out on YouTube and look up cnc painters tape fixturing with supper glue its really a great idea. Also; I only had the 6mm blue plastic tube and the connector called for 8mm so I heater the tube and stretched it until about 1 inch of the tube was large enough to fit over a pencil and it worked beautifully. And holds 120 lbs with no issues. Also the duel adjusters is so versatile that you can make it do anything you like, low air low mist, medium air less mist for less ventri liquid draw, massive air with infinitely ultra-light ventri liquid draw, im telling you; that you have ultimate control over every variation possible with this unit. What I plan to do first is test the lightest liquid delivery with the finest mist and explore how to make the liquid evaporate as soon as it lands on the hot cutter bit so that the evaporation will introduce a refrigeration effect by releasing coldness from turning liquid into vapor and have no liquid mess to clean up, and no coolant waste and good chip clearing and effectively deposit oil on the tool at just the right degree. If I really like something then I enjoy a nice fun show and tell to all my fellow tinkerers. Hey this ones going right in my toy box boys and girls. Lol

I tested it with 10W30 engine oil at 20 psi and it worked. It will be Ok with soluble oil. Flexibility of the output tube is on the stiff side.(the opposite of my concern when I choose it). I need to make an adaptor to affix it to a magnetic base holder.

I took a magnet to the adjustment valves and to my surprise it's not only stainless, it's non magnetic stainless which is great for anti corrosion. I plan to mount it to the side of my mill head with double sided tape to see how I like it before drilling any holes. I want the coolant tip to move with the head in the Z-axis. I like it a lot.