VViViD+ Matte Metallic Military Green (Ghost) Vinyl Wrap Roll (1ft x 5ft)

The media could not be loaded. Edit:: Ok so after finishing the Jeep I noticed that my rear bumper and one other panel aren’t the same color. After spending time positioning the film I can clearly say that this is a DIRECTIONAL film. You have to be careful how you start the wrap as turning it 90 degrees will totally change the color and metallic effect.The only benefit of this is that you have 2 colors to use. A lighter more metallic color, or a much darker deeper green color. You can see the example on my picture of the rear bumper.First I want to start off by saying that I have never wrapped anything before this. I watched CKWRAPS on YOUTUBE and I picked up one 25’ roll to wrap my Yamaha Rhino.I strongly recommend searching for this guys channel and watching some of his videos for tips on how to wrap. This was extremely helpful in being able to self teach myself to wrap my Jeep. After spending about $100 on tools, cleaner, heat gun, and some knifeless tape I took the plunge.Wrapping an UTV is extremely hard since it consists of multiple sharp angles. Even thought the first few panels came out pretty bad, after the 2nd panel I was able to get a hang of it. These wraps were done at 55-65 degrees here in NY and it was not optimal. Even with that temp I only tore the vinyl 2 very small times and that was only because when I cut it I didn’t round the edge.After I did half the UTV I decided to pickup another 25’ roll and do my Jeep Renegade. For the small cost of the tools, material, and some of your time it is worth the effort. The key to a long lasting wrap is PREP, PREP, and then PREP again, lol. I cannot stress it enough how important it is to make sure the surface and surrounding surfaces are extremely clean. As long as you are slightly mechanically inclined and able to remove some screws and clips for body panels you should be fine.Again if this is your first time VVivid vinyl from my research seems to be the best bang for your buck. It is extremely easy to use and the cost is very reasonable.Edit: I picked up VVivid’s dark smoke headlight tint also. I did a few of the lights and posted the pictures. Even though it is a Dark smoke the red is still very visible and the color is not distorted.

went on nice (with small exception explained later) good quality. Color is a great matte military metallic just as shown. i did have a problem of it peeling off some of my paint when trying to pull off to readjust it, but that might be because i used 70% alcohol to clean the surface before applying the wrap, as i saw on some youtube vids. So if you care about your paint don't use alcohol before putting this down. luckily my paint job was terrible (a 15 year old bad repaint) anyways so i didn't care.

I am sure this is amazing vinyl wrap if you are experienced at installing it. I did ok, but it seems as though.... (and I was only wrapping a scooter(panels)....)...that the amount of vinyl waste involved is high. And it would take alot (of vinyl and money) to cover a vehicle of any size. Like i said, I am new at this and I have LOTS to learn.Maybe in the future I will order a sample, or it would be real nice for the seller to offer a practice sheet along with the ordsr so you can learn the limits of each particular vinyl. They all seem to have different levels of heat exspansion.Overall.. I did LIKE the APPEARANCE and any mistake I made was easily recoverable and well hidden even with overlap of the vinyl. EASY TO MANEUVER AND REAPPLY.In the end. I recommend this vinyl brand..., certainly over any cheap(not so cheap) stuff you find in auto part stores.I plan to use VVIVID for ALL my future endeavors including my 4runner.After much needed learning curve is broken. :)👍👍👍

Wrapped my 2012 jk in vvivid ghost metallic military green. The vinyl is very easy to work with and conforms to even deep recesses with the right touch. The vinyl can be stretched and heated a substantial amount without loosing color or finish. It was very easy to heat and stretch over corners for an easy cutting, professional looking edge with no visible cuts, wrinkles, blemishes or discoloration. Finish is beautiful, has a deep shimmer in the light that is otherwise invisible (due to the flake). Wrap is perfectly uniform and has an even distribution of flake. Feels very nice to the touch, like a professional finish and not plastic feeling. Vvivid is #1

I have been using Vvivid products for quite some time and I must say this is one of the better products the Vvivid+. The color itself is beautiful I get compliments all the time and get asked where I get it done funny part is I wrap the vehicles myself. With this new material even people who have never wrapped before can do it easily. I love the ease of the product and how I can reposition without having to fully lift . Great product once again and thanks for makin my car look sexy!

This is a NON directional wrap. So how is it that my front fender is a different color? This was all from the same role fyi. Not only that it’s starting to peel after a month and bubbling everywhere! Stay away from Vvivid they’re garbage quality spend a few extra dollar on Avery or kpfm. This is the worst wrap I’ve had to work with. They’re customer service is terrible as well.

The product arrived with the shipping box and outer bag wrap fine, but the vinyl wrap has a tear.

perfect for what i am looking for. fast delivery and well packages,