Floor-Fix ProAll-in-One Micro Precision Injector Kit - Fix Loose & Hollow Tiles, Wood, Laminate & LVT - Advanced Modified Polymer - Includes Anti-Clog Tip

Note that I'm combining a review for both Stop Creak and Floor Fix Pro in oneWe had 90m2 click system, hard wood herringbone flooring installed as floating floor in the last year and the flooring was creaking in many places. It was driving us completely insane, especially at night. Short of ripping up the flooring at huge costs (no guarantee from the builder), I was willing to try anything, and came across Stop Creak.I've never bought a product with so many warnings before, and more warnings and instructions emails after I've bought it. However, reading the negative (and completely unfair) reviews, I can understand why the seller felt such high level of "buyer beware" was necessary. It's clear that many customers were using this products for the wrong job and wrong flooring and likely with very poor subfloor and still expecting miracles.Stop Creak was extremely easy to use and the capillary action of the floorboard just sucks any product remaining on top in between the grooves. Creaking completely stopped in many places and it was so effective that I bought another batch of 6 bottles of Stop Creak as we have a huge surface area to cover.In other places, where we knew we had obvious subfloor issues (i.e. concrete floor under the floating floor was not level), the creaking noise didn't go away and in some places it even amplified - mainly because the floorboards were now more free to move (which floating floors do). This was as expected and credit to the seller, he did warn about this and that the product would not work in such conditions. But I had to try it anyway.In those difficult spots, I then tried the seller's Floor Fix pro. Unlike Stop Creak which is a lubricant, this one is a flexible glue. As a competent DIY'er, I didn't quite follow the instructions of the seller with this one, but it worked really well and the creaking stopped completely in those very difficult areas with subfloor issues. While the product didn't/can't resolve the subfloor issues, the fact that it managed to keep the boards together and stopped the creaking is proof of how strong it is and how easy to use it is.The metal tip on Floor Fix pro is genius. Yes I did make a huge mess in the first 15 minutes (as complained by some reviewers here) as it is a very runny product (which it needs to be). But simple tip, as you lift the metal tip off the groove where you are working, simply place a finger on the tip to avoid glue from dripping, et voila!The glue washes easily, so don't worry about your finger. It also wipes easily with a damp cloth - just make sure only clean part of the cloth is used, i.e. don't spread the glue where you don't need to.Overall and, in my personal experience, Stop Creak and Floor Fix pro are awesome products. They are not cheap and I still have a lot more surface to fix, but they saved me lots of money from not having to redo my floor. I can only recommend - do read the instructions first though.

I was sceptical at first due to some mixed reviews, but I can confidently say that the Floor-Fix Pro All in One Micro is an absolute game-changer! One of the standout points for me was that, unlike what I’ve seen in other reviews, there was absolutely no leakage at all. This product is clean, tidy, and gets the job done without any hassle.I found the application process straightforward, but I would highly recommend following a few tips to make things even smoother:1. Mask the area with masking tape to keep everything neat.2. Drill 2 x 1mm pilot holes to avoid any vacuum forming beneath the floor. Then, re-drill one of the holes with a 2.5mm drill bit – this is the correct size for the needle provided.3. Insert the needle to the depth of your floorboard (in my case, it was 10mm), and apply the glue with slow, rhythmic pressure. There’s no need for excessive force – just let the glue work its way through slowly.As the glue fills the pilot hole, carefully withdraw the needle to allow air to escape, ensuring the glue settles properly. If the hole overflows, reinsert the needle to release any remaining air pockets, wipe away any excess glue, and you’re done!One last piece of advice – don’t walk on the floor for at least 24 hours to give the glue ample time to set properly. Trust me, this product is worth every penny, and I couldn’t fault it in any way. I’m thrilled with the results, and I wouldn’t hesitate to recommend it to anyone looking for a reliable, mess-free solution.

Having bought other similar products, I thought I’d try this and hope these didn’t leak like others. None of the tubes I purchased leaked, which made the job, easier, less messy and much quicker. I think manufacturers of these type of products need to spend more time on the plunger seal. The idea and sealer are good.The only minor problem I had with this product was the screw thread for the nozzle, didn’t quite sit right. Other than that, good to use.

Compared to a similar priced product from a different brand, I'm just happy that this didn't leave my kitchen looking like an x-rated 0nlyF4ns scene, all covered in white sticky stuff. Which is to say, the applicator actually works without the nib flying off and loads of goo exploding everywhere. Does it work? No idea yet. Tbc

Guys, don’t waste your money or your time on this junk!The product leaks everywhere—the tubes are made from the cheapest materials possible. They start leaking from the top almost immediately, making a total mess. It’s completely unusable and a total rip-off. I can’t believe they’re even selling this. Save yourself the frustration and buy something better!

Had an 18" porceline floor tile which had been down a number of years and noticed on one corner it was clicking when I walked on it. Found this product and watched a few videos on how it fixed problems of this nature. Bought it and duly drilled about 8 x 2mm holes around the corner of the tile about 4" each way from the corner in the grout line. The needle of the product suppied fitted perfectly and pumped the glue into the holes one by one until the glue came out of all the holes and used about half of the tube. Cleaned up the residue and left it for at least 24 hours to set. It has done the job perfectly and now no clicking when walking on the tile. Thoroughly recommended and still have enough to do another repair. Would buy again. 5*****