🕹️ Level Up Your Screen Game!
The amFilm 2-Pack Tempered Glass Screen Protector is designed specifically for the analogue pocket, offering unparalleled protection with a surface hardness of 9H, ultra-clear visibility, and a user-friendly installation process. Each pack includes two protectors, ensuring your device stays pristine while maintaining full touchscreen functionality.
Finish Type | Matte |
Water Resistance Level | Waterproof |
Screen Surface Description | Glossy |
Clarity | 99.9 |
Screen Size | 8.89 Centimeters |
Compatible Phone Models | analogue pocket |
Special Features | Scratch Resistant |
Compatible Devices | analogue pocket |
Item Hardness | 9H |
Unit Count | 2.0 Count |
Number of Items | 2 |
Item Dimensions L x W | 6.34"L x 3.58"W |
Material Type | Tempered Glass |
S**E
Perfect screen protector for your new Analogue Pocket
It took me pulling up the plastic screen guard that the Analogue Pocket comes boxed with by mistake and dust getting under it for me to do the research and find this screen protector.There’s not much to say about the design - it’s a square with no cutouts, so very simple.Application is as with any screen protector - clean, remove any dust and apply. As long as you’ve cleaned effectively, fitment is super simple compared to say a phone, due to there being no need to line up holes or anything.Be aware that the screen protector is quite thick, which I like and see as additional protection, but certainly sticks out a bit if you like your devices very slim.2 pack is fantastic - I’m now covered for future if I ever need to replace!
A**S
Excellent, better fit that the official version
The screen protector that's sold with the pocket is exactly the same size as the screen, which makes it almost impossible to fit without a slight overhang on one side.This is ever so slightly smaller, as such, the fitting is excellent and still protects the screen well.
B**K
Easy application
If you’re looking for good, reliable tempered glass for analogue pocket, this is the one for you. Very easy to apply, and comes with all accessories needed to get best results. After wasting my time trying two other ones from different brands, i can safely say this one does the job right.
P**L
Perfect
Good quality, easy to install and a fair price.
Z**K
Good enough
Exactly what it says on the tin.Good quality screen protector but the dimensions are a little short, leaving a sliver of the bezel unprotected which is fine, just looks a little weird.
M**D
Cheaper than official one and does the same job
Bought this because it was cheaper than the official one, it's easy to align and so long as you attach immediately after taking the original film protector off then you shouldn't need to clean the screen beforehand. So far I'm happy with the protector.
B**S
Excellent screen protector!
Easy to install and made of good quality material and didn’t have any bubbles either which is a massive bonus!!! It was actually put on a Analogue Pocket and it fit perfectly!!!Would recommend!
R**B
Perfect fit!
Great fit, take your time lining it up and you will barely know it's there. Very happy!
U**N
Good value
This is a really good value for the money and a lot cheaper to purchase here than from Analogue directly.
J**Y
Excellent fit!
Chose this screen protector kit for my Analogue Pocket because it includes 2 protectors and everything you need for a bubble-free installation. This kit uses a pair of wing-like handles to center/orient the screen protector into place and plenty of dust stickers, but I found a better method that repurposes those dust stickers as "hinge stickers," which has been my go-to method for literally every device. Here's my methodology used to get a perfect centered and spotless installation:1. Screen prep: I started by prepping the Analogue Pocket's screen with the included alcohol wipes to remove oil and most of the loose dust. Note that it's not important in this step to remove all the dust yet because plenty more will sneak in as you're aligning the screen protector, so we'll address the dust particles later. This step is primarily to remove all the oil and fingerprints.2. Center the screen protector: DO NOT remove the film sticker labelled "step 1," instead I peeled one of the dust remover stickers and attached it to the top middle of my screen protector about half way, leaving some slack for later. I worked from one corner to the next while holding the sticker to nudge the protector into the center of the Analogue Pocket's screen. Once centered, I firmly wrapped the sticker around the top center of the device. If done properly, you now have a "hinge" where you can open/close t he screen protector like a clamshell. This serves as an initial starting point that's relatively locked in, but allows you to make adjustments without the screen sliding all over the place.3. Apply the other hinge stickers and lock-in placement: Next I attached the left and right hinge stickers to the top of the screen verifying that my protector is still center-aligned as I went. Then I locked the protector in place by firmly wrapping all the hinges around the top of the device. Now the protector should be able to open and close over the Pocket's screen like a clamshell. Did this a couple of times to verify that the protector's position is locked-in by returning to center every time.4. Dust stickers: Some dust most likely got onto the Pocket's screen while attempting to center the protector, so now it's time to completely eliminate dust and immediately apply the protector afterwards. I lifted my protector about 50-60 degrees, and used the included microfiber towel to wipe my Pocket's screen. Then I peeled on of the dust stickers and went over the entire screen. It helps to shine a light at a low angle to see any stray debris that the dust sticker may have missed.5. Peel the backing and apply: Immediately after removing all the dust and while still holding the protector up (you dont want to drop it back down on the screen and re-introduce dust from the backing) I peeled the film (labeled "step 1") and gently laid the protector down on the screen. Then I tapped the center of the protector with my finger and let it seal its way to the edges on its own. The squeegee wasn't even necessary at this point because there was no dust or bubbles. If you find a dust bubble, gently lift the protector from its nearest edge/corner, and while maintaining a very shallow angle remove the dust with your dust sticker.Voila, perfect installation.
3**O
Qualitativ hochwertiger Schutz
Diese Displayfolie ist super an den Analogue Pocket angepasst und schützt das Display sehr gut vor äußeren Einflüssen.Ob es bei Sturz hilft kann nicht beantwortet werden, da bisher nie der Fall gewesen.Das Anbringen der Folie ist kinderleicht und blasenfrei, sofern man vorher alle Staubkörner entfernt.Auf jeden Fall empfehlenswert!
Z**E
Excellent rapport qualité-prix
Parfait
C**N
Calidad y ajuste perfecto
Queda perfecto en la Pocket. Todos los protectores de pantalla de esta marca que he usado son de lo mejor, y este no es una excepción. Teniendo en cuenta que la Pocket es un dispositivo caro y de importación, mejor salvaguardar en lo posible su mejor virtud, que es su magnífica pantalla.
Trustpilot
3 weeks ago
1 month ago