VEVOR Electric Brewing System, 9.2 Gal/35 L Brewing Pot, All-in-One Home Beer Brewer w/Pump, Mash Boil Device w/Panel, Auto/Manual Mode 100-1800W Power 25-100℃ Temp 1-180 min Timer Recipe Memory

⭐️⭐️⭐️⭐️⭐️ (5/5 Stars)I recently purchased the Vevor Brewing System, and I am beyond impressed with its performance—especially for the price. As someone new to brewing, this system has made the learning process much smoother and enjoyable. From heating up quickly to providing exceptional results, it truly offers a high-end brewing experience without breaking the bank.Heating EfficiencyOne of the standout features of this brewing system is how quickly it heats up, even with the breaker size I have. It gets up to temperature in no time, making the brewing process faster and more efficient. This is especially helpful when you're trying to streamline your brewing sessions and avoid long wait times.Quality of First BatchesAfter brewing a couple of batches, I can confidently say that the results have been fantastic. For something at this price point, the beer has come out exceptional—smooth, flavorful, and well-balanced. I was honestly surprised by how well it has performed so far. The system helps you get great results right out of the gate, making it a great choice for beginners like myself who want to learn the craft without frustration.Ease of Use & MaintenanceThe Vevor Brewing System is incredibly easy to use and clean. The instructions are clear, and the system is user-friendly, which has made my brewing experience enjoyable from start to finish. Clean-up is straightforward as well, which is an important factor for me. I appreciate that it’s low-maintenance, allowing me to focus more on brewing and less on complicated procedures.Affordable QualityThe system gives you the feel of a high-end brewing setup, but at a fraction of the price. It’s robust and sturdy, and you can tell that it’s built to last. I feel like I’m using a professional system, but without the heavy investment.Final Thoughts & RecommendationIf you’re a newbie to brewing or just looking for a reliable system that delivers exceptional results, I highly recommend the Vevor Brewing System. It’s easy to use, heats up quickly, produces great beer, and is a great value for the price. I would absolutely recommend it to others and plan to continue using it for future batches!

Not impressed with this at all, I've had better results with a cooler mash tun conversion.- Temperature is not accurate (mine is off by about 9 degrees), I believe instructions mention a way to calibrate, but they don't give any detail on how- Does not indicate if temperature is too high: I started my water at 123 to account for a reduction of heat when adding grains. I set the temp to 113 after that, added the grain. At this point, I was unaware the temperature was always wrong, so thought it was at 113. When I then went to step up the mash temp, I set it for 143 and surprised when it was instantly at 123 (not 113 which is where it was set). This was the point where I knew the temp gauge was not testing for high temps.- Once I noticed the above, I ran a thermometer in the mash - super uneven heating, temp was off by 7 to 9 degree at any given point, and again, does not indicate if the temp is higher than set- It was pretty slow to raise temp in all circumstances- Because of the uneven heating, if you are not constantly stirring, it will get hot at the top half, and not at the bottom where the probe is, then you stir, and you end up way to hot. My final mash ended up being way to hot because I didnt stir enough, so ended up with a super low yield than what I've achieved with this recipe in the past.If you are reading this, and still plan to buy this, here is my recommendations:- ALWAYS run with a separate thermometer and constantly look (so a corded heat resistant thermometer that just hangs in the mash the whole time)- Stir as much as you possibly can to even out the temp, otherwise it will get too hot- start lower than you need and work up as you hit temps to make sure you dont get to hot- Don't expect your first run to go well, there is apparently a learning curve to make up for all the inaccuracies with the device.I am still undecided on if I am keeping it or not - it is not that expensive compared to other options, but I'm just not sure I can dial in the process enough to compensate for how bad it is.

Holy crap I love this thing. I’ve been using it for eight months. No complaints. I also have an expensive Digi boil brewzilla v3 and they’re pretty comparable.

I’d just like to say that so far I like this product. I just received it and was concerned when opening the box, the wall had a good size dent in it but I was able to push it back out, but impact spot still noticeable. The construction seems light (my brew kettle is heavy than this thing!) and I am worried that the welds won’t be adequate enough to hold the weight of wet grains and how easily I fixed my dent I had at first but time will tell. Assembling wasn’t all that bad as I read, and mine came with a manual that some complained they didn’t get but it is a little vague. I did watch several videos before purchasing so that helped. I am doing a test run with water to figure it all out and it appears to hit temps well and maintains them. Hit a rolling boil in 15 minutes from 152.5F roughly at 1800 watts. I bought this product to reduce brew time and go lean ditching the bulking cooler mashtun, hot liquor tank, kettle, and propane burner and it is the most affordable option, I just hope the construction of it holds up and don’t end up with buyers remorse and wish I bought a digiboil, grainfather, etc. I gave it a four star since as I ran my test I am quite pleased, but again the construction of it and me not having a brew day with it I can’t give it a five star review… yet.