TeexpertCrystal Clear Epoxy Resin Kit 1 Gallon Self-Leveling Coating and Casting Resin, High-Gloss & Bubbles Free Resin and Hardener Kit for DIY Art, Jewelry, Table Top, Molds, Wood 1:1 Ratio

Great epoxy/resin with hardly any bubbles! Easy to read instructions 1:1 ratio, easy to mix, cleans up nice with baby wipes and isopropyl alcohol. I'm a repeat customer been using this product for a year now.

Absolutely a good resin. It degassed beautifully and has a great cure time even without a heat mat. I had great results with very little to no bubbles. I would definitely purchase it again.

Works great. Little to no bubbles.

The customer service I received was outstanding, they not only replaced the product for another try but sent an additional gift as well. I WILL be sending another review once I am able to use the NEW product sent. Stay tuned.I truly wanted to love this resin. The pumps sent are the first I've really tried that seem to deliver accurate and equal amounts and the clarity would be good, except for the micro bubbles. I decided to try this based on a number of creator recommendations, including Steve McDonald, BUT every single project I tried with this resin had bubbles, small micro bubbles. larger bubbles, and even bubbles still releasing AFTER it has started to cure. I tried warming the resin both before and after mixing, I tried a heat gun and a lighter, I tried letting it sit to degas and popping bubbles before I poured. I tried a resin warming pad on all 3 settings and different times from immediatly while pouring to waiting until it starts to set up to turn on the pad and with no warming at all. I have had to spend many hours repairing projects and some have simply had to many bubbles to try. A simple very shallow mold requires checks over and over and still will result in seeing bubbles after iut has cured so far into the process you can no longer pop them. Teexpert I'm very disappointed and wish I had returned in the timeframe instead of deciding to test out ways to make it work.

I was about to quit playing with resin after going through way too much money and ruined products because of other resin types. Then I tried this one and "I'm back in business, baby!"It does need a bit of work, but the results have been a resin that release the bubbles better than anything else I've tried, so to my fellow newish resin enthusiast... Here's how I've had best success:1) Measure the needed amount of each into separate cups (I use reusable hard plastic ones with lids, so I have less trash waste) and place them in some warm (not hot) water for 3-6 minutes depending on the amount.2) Mix the A+B resin in a new cup. I use an electric resin mixer and it does have to be mixed a bit longer than other ones - really look for those stringy part in there!3) Place the cup back into the warm water for 3-5 minutes.4) Pour slowly and then use a toothpick or craft stick on the sides of your product to make sure no bubbles got stuck there. And remember, the deeper the project the harder a time bubbles have releasing, so work in layers if you must.5) Do your usual heat gun/lighter tricks, and voila, you'll *most likely* have a nice mostly bubble free result!One last thing... This is a lower viscosity resin and works great in molds, but I found that it really wants to fall over the sides when used as a top layer on coaster for example (even after a 15-20 minute work time), so you may want to use it as the bottom layer and then top coat it with a thicker working resin or wait long enough till it's thickening up a good bit itself.

This has been my resin of choice so far. Mixes easily and bubbles are minimal and easy to work out. Not at bad price at all compared to some of the other resins I've tried and had issues with. Will continue to buy this one.

So far this is one of the best ones I used. Very little bubbles at all.

I don’t understand the hype. In nearly every resin group this is one of the most suggested to beginners for safer, odorless, clarity, etc. even the description says odorless and non toxic. To be extra safe, I wore PPE, had an air purifier going, and the window open behind my work area, so I didn’t notice the smell. However when my husband came in he immediately complained about the terrible smell. After leaving the room for several hours and coming back I also was surprised by the smell. Just going back in to check on the project I had an Instant headache that is just lingering. The window was still open, the purifier was still going and it was still very strong. I won’t be using it again and have wasted the money on a two gallon kit.