KOMI10 Ton Hydraulic Crimping Tool and Cable Cutter, Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool with 9 Pairs of Dies, Hand Operated Hydraulic Range 12 AWG-2/0 AWG

Works just like name brand very excited

I found these easy to use. I did not have any issues with needing to bleed these. I did approximately 50 end crimps, or about 100 total crimps, with this tool.

Works fine although it doesn't provide auto release like is advertised. It has a manual release valve. Also there are no retainers for the dies in the head and they can twist or fall out if jaws are released completely, like when you are inserting a wire and lug to be crimped.Also the ad lists crimp sizes in wire gauge sizes but the dies have numbers stamped in them that appear to be diameter in millimeters and do not relate to wire or terminal gauge. No size chart is supplied so it is a guessing situation. As I use mine I will stamp them for wire gauge.1 petty thing is the case doesn't have enough spaces for all the dies requiring you to store it with 1 set in the tool which makes storing by size difficult.As far as function it works and made multiple satisfactory crimps. For the price it includes a seal kit to repair it if needed. Don't know if that is good or bad but it is included but no space in the box to store it until needed.

Well this crimper is actually really nice however they did not include any form of Awg gauging its all in metric system. Second every one of the actual labels was backwards from how it should be

Worked well for cable railing system; However, there were a few times where hydraulic system would only engage to a below average #lbs rating leaving a less than perfect crimp; In this case, just release hydraulics, reset, and start again on the same crimp.Overall good, and a nice value for the money; Crimped over 150 steel pins/collets with it thus far. Hopefully it will last into the future.