Eightwood BNC Splitter Adapter 2-Pack BNC Male to Dual Female Tee Type 3 Way Audio RF Coax Connector

When you hold this in your hand you can tell it's a quality part because of it's weight! It works excellent also! I bought this so I can connect 2 probes or 1 probe and 1 ground to my oscilloscope! I was too tired of dealing with 1 probe with the 2in ground wire that clips on it! Now I can connect 2 probes and use the ground wire on 1 while I use the other probe with out the ground attached to it which gives me allot more freedom to move around. I also bought a bnc to banana plug adapter, so I can connect that to it also and use a single ground wire from my multimeter as a ground, then I don't have that 2nd probe laying around to skew my results. I would also recommend getting the bnc to banana plug adapter so you can connects probe and seperate ground or so you can use the cables from a multi-meter which gives more options to clip on to things

I had two scanner antennas and wanted to see if they could work better together… According to my antenna analyzer, they didn’t… but at least I tried. It is now just an added piece in my antenna bag. Even though it didn’t work for me, I can’t give the item a bad review, it functioned as it should.

I purchased a couple (2) of these for my @home work lab bench setup. I am an engineer with 30+ years medical imaging equipment experience. I have used these for 5+ months prior to writing the review. I have 3 types of splitters, this one, a T-split and a Y-cable based one. My preference and daily use one is the V-cable (BNC splitter cable BNC Male to Dual BNC Female V adapter), followed by this one. The T-splitter doesn't get used.Fitting: Good - tight fittingQuality: Good - feels good, has some heft to it for the size.Although my preference is the V-split cable over this on my arbitrary waveform generator, I do tend to use this splitter as an external input trigger into my AWG where I want to bring in a couple of trigger signals.

Perfect solution to make my distribution box receive 2 signals depending upon my needs. One at a time obviously.

It works. Unlike another type I bought from a different seller. The OTHER one had high resistance and wasn't designed to be that way. Messed up some equipment because at first I believed the readings it was giving me. When I received THIS one I quickly found that what I thought was 700 millivolts was actually 4.99 volts. That's a HUGE difference. So yes, I like this one. If you're shopping for one of these and come across this review - stop looking and buy this one. You won't be dissatisfied.

Greatly improved my radio reception, seems to improved my simulcast distortion issue.I can run. 2 antennas, and get great reception.

Use a product for splitting signals and feeding signals to an amplifier

Just what I needed for this job