YIJINSHENG 30 SMD 5050 LED Strip Light For Car Trunk Cargo Area or Interior Illumination Decoration, Xenon White, Auto Accessories

Easy to install just had to tweak some thing plug the positive and negative directly into the port for the trunk light and used electrical tape to hold it up, the light has very good adhesion to metal.

I'm plenty satisfied, very bright at night and barely noticeable if installed properly. I liked the adhesive backing. The spare connectors came handy while installing in the trunk of my 2014 F30/320i. I placed electrical tape at the far ends of the tips kept bending upward slightly; this will keep them from accidently getting snagged while loading & unloading materials in the trunk. Good purchase at a reasonable price.

I really like how well the adapter fit like the factory bulb. No splicing or cutting. Adhesive isn’t gonna work too well on some cars but I put light strip holders to guard/hold it in place with screws into the trunk liner. Extremely bright.

Easy to install, adhesion's great. Brighter than stock bulbs.

Installed in a 2018 Kia Forte. When the package came, I guess I thought it would be larger. It is a small box. The first few pictures compares the size to a few quarters. While the whole package is small, it provides decent light for the trunk. There are no instructions but, it is not too complicated to figure out if you can replace a lightbulb. Here are a few technical details about the product:The strip is about 19.5" inches long. About half way down the strip is a soldered-on pigtail at the 10" mark. The pigtail is about 2.5" inches long.There are 30 LED's on the strip (specified in the product description as well). They are of the 5050 SMD design. LED strip has foam-based sticky tape for better cohesion (as opposed to normal LED strips).The kit comes with two connectors and an extension wire.Festoon type spring load plug and pin type plug. Connectors are 2.5" inches long.Extension wire is 12" long.The festoon bulb is what I had and used the festoon connector. The LED strip is polarity-sensitive, so test which direction the festoon connector should go in.In my case, the existing light was in the center of the trunk, so did not need the extension wire. Everything tucked up into the light socket area when I replaced it. One note of caution, when sticking the tape to the underside of the trunk, don't get it too close to the hole where the existing light facility slides back in, or it could be impacted.I tested the strip prior to install to make sure everything worked (someone noted earlier they had a few of the LEDs not working, in my case everything worked fine).The tape on the LED strip is foam based 3M (at least as labelled) tape. When installed, had good adhesion (unlike traditional LED strips with the paper-think sticky tape). I don't expect this to fail anytime soon.The results were fantastic. As can be seen in the pictures, before and after shots are dramatic (well, maybe that's overkill, but it was pretty cool). This was a great value, and easy project to do. I would recommend to anyone that has a dim trunk light.