SUPERFINDINGS 8m Hot Foil Roll Heat Transfer Foil Paper 19.3cm Wide Transfer Foil Roll Golden Metallic Hot Foil Stamping Roll for Foil Quill/Heat Foil Pen Scrapbooking Craft Projects

This definitely did the job but it shed as I did it and took more glue than usual because the gold kept pulling away.Worked well though. I used it for the arms on my son's pinata. I also tried to use it to emboss some things after seeing how flaky it was but it didn't work.

Awful product, doesn’t stick to what you want it to and covers the parts you don’t want it on!

After using sdx900 to produce foiled cards, this product has turned out to be a really good purchase better than 4 Brother sheets for a lot more money then it should be. However, these rolls are good value, very easy to cut and foil with. I haven't had (as yet) a good result with the pink roll but time will tell if this is just me or whether there is some other issue. All other 4 foils are excellent and do very well. If you need to adjust pressure of foiling on the sdx900 then do so, I found that a light pressure does a better job than being heavy handed. Its all about experimenting and you should certainly experiment a bit with these foils!

I was expecting foil but got plastic instead

These are great. I printed my imaging using two printers. Inkjet & Laser (B&W mode) where I wanted the foil. Cut & place the foil pieces to size. Use a little piece of masking tape. That you have stuck to the back of your hand to reduce stickiness a little. Stick the foil pieces in place. I put it through a hot., cheap laminator. Brilliant job done.(A clothes iron my be used too)Exactly as advertised. A. lovely selection of colours too.

I do a lot of toner foiling and this is advertised as to be use with a toner and the foil will adhere to the card where you print. This foil has completely covered my project.You can see where I have ringed I have layered my foil under the top foil to add a bit of colour. You can clear see where the foil sits underneath. The rolls are also tiny.This product is heat reactive foil not toner foil. Miss sold and will be compliningTotal rubbish and a waste of money spend a little more and get some descent product it will be worth it in the end.

Didn’t react to the toner very well

The foil sticks to the card/paper