Dash Cam Hardwire Kit Cable - 13ft COOAU Dashcam Hard Wire Micro USB Ports for Car with Acc Detection 24H Parking Monitoring | 3 Fuses Types for Dash Camera D30S D20 D20S (CH410)

The media could not be loaded. I would like to give a personal experience review of the ST-CH410 Dash Cam Hardware kit. The kit came quickly in 2 days, and it was simply boxed including a fuse puller, adapting power connectors to fit multiple fuse box configurations. There was also included a battery protection power supply adapter that uses 3 wires. One black wire attaches to a screw to metal nearby the fuse block for battery – Neg. and the other 2 wires of which the Red one connect to an accessory terminal in the fuse block terminal that is Battery + Pos. while the vehicle is on ACC or Running mode. The other Yellow one connects to a Battery + fuse block terminal. A Double fuse holder is used to adapt to the fuse block, removing the existing fuse and plugging it into the Dash Cam hardware wire. See picture. A 5 amp Fuse from the kit plugs into outer socket, while original vehicle fuse plugs into the inner socket closest to the 2 pins that plug back into the fuse block. Wiring up the cam with the new micro-USB cord works just like the power supply that would normally come with the Cam, though it will now power the cam after ignition is off with lower power consumption, with a blank screen during any triggered recording function.Once connected the Cam settings turned on to allow recording for Motion Detection, or Parking mode. I will use the Motion Detection as my Cam records quickly when motion or activity occurs nearby the vehicle. I noticed immediate recording operation when moving near my car as shown in the video. The second half of the video shows that the rear camera records at the same time, though I edited out the overlapping portion. I will feel much more at ease knowing I have recorded video of activities in the area I park.

Total crap! Sometimes the camera turns on, sometimes it does not. This was installed correctly, according to the instructions. I used to work for a car stereo installation company, and I know what I'm doing. This is a faulty product. I would appreciate it if the company would replace it. I can't send it back to Amazon because it's past the 30 days.

Quality packaging and good wire with a nice thick jacket but still very flexible.

This doesn’t come with 3 tips for “parking mode”. Means that it only has ground, and power. If you want to install your dash cam for parking mode, then you need to buy a hard wire kit that has 3 lines on one end: ground, power AND accessory.But if you are to install your dash cam without parking mode, then this wiring kit is perfect!

Worked as it should

There customer service is awesome. I had an issue with the hardwiring kit and they solved it right away. Thank you for answering my emails when I needed help.

Not a perfect fit and doesn’t include MICRO2 Fuse Required for Ford vehicles.

The total amount of time it took me to exchange it from the USB cord to the hardwired set up was only about 15 minutes. It greatly assist in making sure my car is safe when parked.