Perlegear UL-Listed Full Motion TV Wall Mount for 42–90 Inch TVs up to 150 lbs, Pre-Assembled TV Mount with Tool-Free Tilt, Swivel, Extension, Max VESA 600 x 400mm, 12″/16″/18″/24″ Wood Studs, PGLF16

This is the second time that i have purchased this tv mount. It is very easy to install using the provided instructions and is super sturdy. I have one holding up a 77 inch tv and the mount doesnt struggle at all holding the weight. The other TV is a 49" -- which is probably overkill for the application. The idea here was to have the mount in place such that if/when that TV dies then i can just big a much bigger tv there on the same mount.

This is a strong, well-built and well-designed TV wall mount. It adjusts in and out and side to side smoothly and makes it easy to fine-tune all the adjustments you may want to make for the best viewing position and angle.I’ve installed several wall mounts of lesser quality and price for TVs in other locations. This wall mount is superior in a heavier-gauge metal that appears less likely to sag or bend than these lesser wall mounts. I also appreciated that they included all of the heavy-duty hardware that is needed for any kind of installation.The template and level included made it easy to install the wall mount in the precise location where I wanted it. If you’re installing in a typical home drywall you will need a stud finder or some other method of determining the location of the wood studs behind the drywall. But the wall mount frame has plenty of holes to accommodate different spacing of studs. Once you determine the stud locations then it is an easy matter to use the template to place the wall mount where you want it. Probably the most difficult and time-consuming part for me was deciding the exact height on the wall where I wanted to mount the TV. Just a tip if you’re doing this without a helper as I did: find a large sheet of cardboard that you can cut to the size of your tv and then use masking tape to move it around on the wall until you determine your desired vertical and horizontal placement. Otherwise, enlist a couple of strong helpers to hold the tv and move it up and down and back and forth to find your desired placement.Once you have figured out exactly where you want your tv to be, the actual process of installing the wall mount on the wall, installing the mounting plate on the tv and then attaching the tv to the wall mount is a piece of cake.

This is one of the best products I have seen when it comes to full motion, large TV mounts. It holds a tremendous amount of weight and is super easy to install. Once you find center of where you are hanging the TV, you place the provided template with the conter hole on the mark you made and then all the others are easy to see where they go. Everything you need is in the box. Elated about the new mount. Is working perfectly and the full motion gives so many different viewing options!

No problem installing. Easy to use and strong.

Bought for my 75” LG in corner of hex shaped living room and worled as I had hoped.

2025 April 30 Update -In the original feedback below, relative to the original purchase I set the "Star" raging to three stars.I have just changed that rating to four stars because the seller has offered me a full rebate on that purchase. Therefore, customer support is acknowledged as being exceptionally responsive. But the feedback below remains the same, as it is accurate and objective. In fairness, I declined the rebate because the product works just fine for my static application.2024 July 17 - The "Perlegear UL-Listed Full Motion TV Wall Mount for 42–90 Inch TVs up to 150 lbs," was used to mount a new (2024-25) Samsung 85" TV. The mount is well designed and relatively straightforward to install. It worked perfectly for my purposes which turned out to be ... a non-moveable mount once installed. I (with help) was able to mount the TV and position exactly as I wanted it. But if I were to purchase it for its moveable capability, I would not buy it again. When the extension feature is utilized, the extension arms are not rigid enough to hold a large TV in place properly. That is, when the arms were fully extended, the TV happened to lean down to the right. The extension arms, when fully extended were not rigid enough to keep the TV from slumping down on the right. Note that I was meticulous with the leveling the mount on the wall. But, once in place, and the extension arms pushed back in completely, and tilting the TV precisely as I wanted it, the wall mount worked just fine. Luckily I have no need of utilizing the extension feature; so all worked out fine for me. But I may use the extension feature in the future for a short period if I ever decide to paint the wall behind the TV. Bottom line ... the mount worked perfectly for me in that I did not need the extension feature except that it made the hanging process simpler.

A very rugged full motion tv wall mount.Easy install….just hit studs and you’ll be fine.

Was very easy to put up and love the way the tv looks on it.