FPVtosky RC 2 Controller Sun Hood Cover for DJI Mini 4 Pro, DJI RC 2 Joysticks Protector for DJI Ari 3 Accessories, Dji Mini 4 Pro Drone Controller Screen Protection, DJI Mini 4 Pro Accessories

This cover is a perfect fit for the DJI RC2 controller. Once fitted the controller joysticks can be left in place and are protected. This lowers the risk of cross threading the joystick threads which could happen after repeatedly unscrewing and screwing them into the controller. Included in the kit was a couple of screen wipes to clean the screen before attaching the screen protectors. The extending sunshield is very useful and a small hex head screwdriver is supplied to adjust the tension on the sets of hinges.There wasn't any instructions and I found the best way to fit the cover was to extend the two controller antennae straight out at the back of the controller and twist them to give clearance. Hinge the cover open at 90 degrees and place the baseplate of the cover between the antennae and push the rear of the cover to slip the baseplate almost into position. Then push down on the baseplate near the back of the controller so the top retainer clips over the rear of the controller top and the baseplate sits flush with the controller base. Then screw in the retaining screws underneath and reposition the antennae.

This is anexcellent fit fir the dji RC2 controller.Good value and complete with knurled fixing screws.

I'm a little puzzled by some of the reviews saying this isn't a great fit.Mine fits my DJI Mini 4 Pro perfectly without the need for any forcefullness - just ensure you open up the antennas before you attempt to fit it.(I don't know for certain, but I believe this visor will NOT fit the DJI Mini 3 Pro)The little knurled screws align perfectly with the holes on the RC2. Don't overtighten these just nip them up firmly, and be mindeful that youre screwing them into a threaded insert in plastic - overtightening could pull the insert out.The screwdriver that comes with the visor, is for adjusting the friction on the hinges. I gently tightened mine as I felt they needed to be a little bit stiffer.The quality of the plastic is good but this is thin plastic to keep bulkiness and weight to a minimum, so treat with respect and there is no reason at all that this should break.I was actually surprised at how good this visor is.Would I recommend it?Without hesitation - Yes.It gives good shade and does not impede any operation of the RC2 that I can tell.It fits into the standard DJI carrying bag WITHOUT the need to remove the joysticks.All in all, I'm very happy with this shade, and felt that it was slightly cheaper with its added additional fold out 'shade' than others out there that don't have that feature.

Fits like a glove, just be careful to fit gently and get the alignment right. Handy as a sunshade and the strap feels nice quality as do all screws to fit it. The screen protector went on easily without bubbles.... Glad with the choice I made here.

I received the kit today and have just installed it.First impression the materials look and feel good, but time will tell.Was very simple ro setup and install.The screen protection is very good.Happy with this purchase.

There is no perfect sun hood for the RC2 controller. Can’t be as it would need to have a completely enclosed viewing area! So any hood is a compromise and this one is IMO the best that is on sale today. Why do I say this? It is easy to fit with little hand tightened screws for fixing it. It doesn’t cover the whole of the controller which others do so joysticks and buttons are not affected. It has the extra “flap” which should help with keeping the sun off the screen. And it comes with a little wrench for adjusting the torque of the hinges. And lastly it is so slim that it still fits inside my fitted case. A great and inexpensive accessory.

Works well

Not bad, hinge a little bendy but works nicely if you support the hinge when opening and closing