BIG RED T93007 Torin Hydraulic Stubby Low Profile Welded Bottle Jack, 30 Ton (60,000 lb) Capacity, Red

Size is key!! The functionality and jack quality was amazing. Did not have any leakage of hydraulic oil and I use it to fall trees and lift heavy rolls of wire.

Fair value, works perfectly, lifted and leveled a house with 2 of these, comparable to harbor freight s jack offerings....would recommend...

The bottle jack performed very well. I was replacing the skirting on a double wide mobile home. When I pulled off the skirting, concrete block supports on the outside had been installed incorrectly and were tilting outwards.I used the bottle jack to lift a 20,000 pound mobile home slightly to adjust the supports. As you might imagine, it took a lot of pumps to get it in position. It lifted the house without problem. I could hear the house creaking as I lifted it 1/4 to 1/2 inch above the starting position. Once it settled it back, everything was hunky dory.I can heartily recommend this product.

Works very difficult going up and down out of the box. I used hydraulic fluid on the ram and it will fall with hand pressure now after taking it up about three times to work the fluid into the seals. Took all six pins out from the pump handle mechanism and greased all the friction areas and the pins themself. Now it pumps up with very little effort even just using my finger without the lever as long as there's no load. I have to try it with a heavy load but it doesn't even feel like the same pump that just arrived.

I needed a road jack for my 6 wheeler. this did the trick for a fraction of the price.It has held up very well and i can not complain. heck i even bought the air option of this.

I needed this to lift a wall in a kitchen to add supports. The first time I used it It took alot of cranking to get it going but once It started going it lifted the wall with no difficulty at all, in fact I barely noticed much of a difference in resistance when cranking. However I went to use it the second time and just couldn't get it started, after inspection I noticed the little metal ball bearing that is supposed to be in the side of the jack was on the ground by where i lifted the wall the first time and can only surmise that when I released the pressure on the jack it came out. I filled the jack with hydraulic fluid thinking it may have been low. I reinstalled the bearing into the grommet. Unfortunately it still would not lift anymore. If this functioned like it did the first time I would have given 4 or 5 stars.

This thing is 100,000lbs of go up. I used it with some chains and timbers to jack some large roots out of the ground after a tree removal and sub-par work from the stump grinder contactor. Was able to get them above grade to attack them with a large sawz-all. Probably could have gotten away with 20 or 30 ton. But what the heck. It is a beast. It's heavy but not much it won't lift.

Awesome jack, I wanted something that could life my triple axle boat when a tire failed. Turns out this could lift the boat, truck, trailer, neighbors semi and half the road. It’s a little smaller than a 5 gallon bucket.