Qwiizlab Magnetic 2230 NVMe SSD Enclosure, Supports iPhone 16/15 Pro Max ProRes, 10Gbps USB Type-C, 100W PD Charge, Fits PCIe M.2 M-Key up to 2TB, Aluminum Case (SSD Not Included)

Works perfectly on my Lumix S5iix camera although pass through charging works only when the camera is off (camera issue). Currently housing a 2 TB NVME drive. When using with my phone, the enclosure is strong and fast. The short bendy cable is perfect for camera, phone, and laptop data transfers.

The under the radar Steam Deck solution for running Windows. Highly recommend going this route over SD card, much faster. Pass through charging works, this does everything the Genki enclosure is supposed to do for a little less money, feels solid and looks better to me. Excellent.

Having started with the venerable Samsung T7 to record Pro Res video from my iPhone 15 Pro Max, I now have several of these enclosures for just this purpose. But what a journey getting here. To cut a long story very short, these enclosures are not all equal and by that I just don’t mean features (this one is excellent for features), but not all enclosures work with all memory brands/models. It took me a few tries before I found a suitable memory for this Qwiizlab ES02UR Pro. I ended up with the Corsair MP 600 Mini 1 TB. Before that, I had memory chips that were actually more than double the price by big brand names. However, those would either heat up to ridiculous levels that you couldn’t handle the enclosure, get error messages stating there wasn’t enough power from the phone to drive the system, or if it did work, it had constant drop outs, cut outs or actually boot the drive altogether. But, I can say finally, the Corsair MP 600 Mini 1 TB works with the Qwiizlab Pro enclosure and the iPhone 15 Pro Max perfectly well with no excessive heat (it does warm up obviously with constant use).The enclosure is a clever design, one can add a power bank to it which will charge your phone. It should be considered in your ‘Rig Imagination’ as unless you are shorting short, 5 minute clips on rare occasion, the enclosure will suck your phone empty of battery power. Fast.The enclosure also has another USB C input so you can attach a microphone Believe me, though phones have them built in, if you just buy an inexpensive shotgun mic, it makes a noticeable upgrade to your audio.All in all these enclosures are evolving rapidly in the marketplace. For use as a standalone ssd hard drive for your laptop or PC, you can do better than this Qwiizlab. But, for recording video from your phone - especially Apple Pro Res - this is the way to go. And currently, at present, right now, the Qwiizlab ES02UR Pro is the best unit on the market. I don’t know if I’ll be able to say that next month, but for now I can as I’ve tried allot of these. Honorable mentions to 4Smarts and Sharge in this segment too. But Qwiizlab beats both for one reason or another.Just remember to get the correct memory. Some operate at too high a voltage and iPhones are especially sensitive to this. You need a ‘lower powered’ memory. I also found 1 TB units operate better than 2 TB units, go figure. Don’t go by speed ratings on the memory, as you’ll never see past 1 GPS anyways. And even the cheap ones are super fast. The aforementioned Corsair works (with IPhone 15 Pro Max). You may have more flexibility here with Samsung but I didn’t do my time consuming experiments with Android.As is, with all equipment above, this gets a high recommendation from me.And a special thanks to Amazon for helping me get here.

In all, I've purchased 4 of these enclosures each with a 2 TB M.2 NVMe and they work great! I do wish they supported higher speeds other than a max of 10 Gbps as both my M.2 and USB C cables are much faster - the USB C cable I'm using supports up to 40 Gbps so there is a missed speed bonus to be sure.Having said all that, it is still more than able to record Apple ProRes 4K 60 fps with zero dropped frames and zero wait time when you stop recording.The enclosure is very well made and includes everything you need to use it except the M.2 card. When shopping for your NVMe card to use with this be sure to check the size and compatibility before you buy the card to help save you some frustration. If you are planning to use Apple ProRes 4K 60 fps but remember the file sizes are super huge. A 2 TB SSD will give you about 1.5 hours.If I could change anything or make a suggestion to improve upon this enclosure it would be to make it thinner. I'm no engineer, but from what I can see the height could easily be cut in half or more. This would also make it lighter, but more importantly a thinner enclosure might actually make it possible to use while on a handheld gimble.

Good design with magnetic mount attachment so you don't lose the SSD or forget it. Holds to the phone quite well. Yes, does require screws unfortunately, would have been great to have screwless design at this price. Also a way to wrap the cable around would make this perfect. Note - you can only put a 2230 NVMe form factor SSD which is the smaller size and up to 2TB max. Like the charging passthrough option. Overall a good buy.

I love the build of this product. My only complaint is the back MagSafe stand. For my use, it’s really weak and flimsy. I wish it had stronger magnets and a better hinge.

I would highly recommend this little ssd card enclosure. I was easily able to insert a 1 TB ssd card into it. Note that it closes with a tiny hex screw so it is not designed to readily swap out ssd cards.. It draws little enough power that it shows up as an external drive on my iPad mini gen 6 (with usb-c port), but in case you need it, there is an additional pass through slot to simultaneously charge your device while using the drive.A couple of small bonuses: It includes the screw driver. It also included an attachable magnetic ring if you want to use this with a mag-safe compatible phone or case

So far the best iPhone accessories I have encountered.