45 sqft Floor Heating Mat Kit, 120V Electric Radiant Floor Heating System w/Adhesive Backing, Aube TH115- AF-120S Programmable Floor Heating Thermostat with Floor Sensor. In Floor Heating

Will work well.

Seems to work as advertised. The mesh scaffold makes the install so much easier. Can't imagine how hard it would be without it. Programmable thermostat is full featured so basically nothing to complain about. Trowel groves matched wire spacing so that's nice. One note of caution if you are not covering all of your floor with this make sure to use a trowel with deep groves. Maybe half inch. Else the tiles sag where there is no wire.

If you ever wanted floor heat this is the way to go. It was easy to install. I watched various videos to see the pitfalls and tips. The biggest fear and caution is to not cut the wire. I was appropriately paranoid about this. I ran several continuity checks. Then I had to worry that the tile guys laying thinset and tile over it didn't cut it. They were very careful. They even devised a plastic trowel to work the thinset. When they were done I ran one more continuity check and it was still OK. With that I hooked up the power and the thermostat and voila it worked. I got exactly what we wanted in our renovated bathroom, heated floors.

This would be perfect to use in a bathroom with a standard rectangular floor space. It came beautifully packaged with no concerns. After talking with my contractor and understanding that I wanted heated floor plan that was more custom, I ultimately had to return this one for the a product that would allow customization of my floor plan in front of my sink area, toilet, bathtub and shower. But this would be perfect for a standard bathroom.

Product description was true to form. Easy installation, I had a small area and it fit perfectly and heats the floor within a few minutes. Thermostat was surprisingly technical and allowed for daytime, vacation and other settings which allow you to control the heat. I put it over cement board and I mortared directly over it. It took a little longer to lay the tike as I needed to build up the mortar in the surrounding areas but overall the product works well.I did add an extra sensor just in case the current one goes for some reason. It's a cost of less than $7.00 so i would recommend buying it along withe the product.

tl;dr - mat cable labeled to be used with GCFI thermostat, the supplied thermostat is not GCFI compatible; will not pass most local inspectionsTL;DR kind of says it all. Instructions are great, the thermostat (no repurposed) is easy to program and super convenient. The thermal sensor to embed in the floor worked right out of the box which is not always the case. The *ONLY* problem is the thermostat provided is non-GCFI which has two issues for me:1 - the mat labels and documentation clearly state to be used only with a GCFI thermostat2 - to get a super priced item the seller is putting a incompatible thermostat with the mat and heating coilPositives:* the matt was 18" wide which kind of surprised me* narrower mat meant it was easilyl to cove my 15 square feet* the mat has a sticky (ish) backing that mostly works* sensor was plenty long (came with the thermostat)* plenty of cable to run to thermostatNegatives:* the thermostat is the wrong kind for the mat and cabling* the thermostat is not GCFI* the thermostat afaik will not pass most local building codeConclusion:Just don't purchase it. Unless you can piggy back the thermostat on a circuit that already has a GCFI breaker on it, then cool! Otherwise don't.NOTE: in my location the radiant floor heat needs to be on its own circuit and each thermostat needs on that circuit must have its own GCFI compliant thermostat. This is increasingly standard.So read the fine print, know our local codes. Me, I just can't recommend this product at all. Which sucks, as the matting was great, the heat coil rock solid, sensor worked out of the box, and the thermostat has been repurposed and it super easy and convenient to use. The parts just don't work (or should be boxed) together.

We installed this radiant heat flooring in two of our bathrooms, one under marble, and the other under vinyl flooring.Provides wonderful warmth!And although we are so glad we installed this, no one is happier than my cat!

super easy to install, wires are much more durable then the direction and Youtube says. the entire mat is sticky so it just sticks rights on the floor and doesn't move. Other brands are not sticky. must plan the thermostat location to be relative to the starting location of the mat. other then that its fool proof and a no-brainer. expect 2-3 times the length of time expectted to do project with no mat, this is to do planning the mat and being gentile with trowel and thinset.