SuperATVHeavy Duty Scratch Resistant 3-in-1 Flip Windshield for John Deere Gator HPX, 620i, 625i, 825i, XUV 850, XUV 855D, Can be Set to Open, Vented Or Closed, USA Made

Fit my 855D gator great. Heavy duty and works great.

Took a few minutes to install. This is my second windshield, the last one was from a different manufacturer and was really flimsy and cheap. This one is definitely is much thicker and more study and works flawless. I love it

It is a nice windshield but be prepared for ime fit issues. The righthand mount on the rollbar needs to be exactly where the grabhandle is welded to the rollbar. You either have to go above it or below it. If you go below it, the flange where the upper & lier windshields meet is way off. If you go above the grabhandle, you need to fudge the seal up on the hood and raise the hard plastic roof about an inch and a quarter. You have to make compromises to fit. Mine is 620i and I used some urethane body lift donuts to raise the front of the roof.Also, the handle does not latch in the closed position but only in the vent position. That's a separate issue. M8 Lock nuts for the shock absorbers were not shipped. I spent an extra $4 at fastenal and used some odds & ends I had lying around to make it work.

Product fits perfectly. Installation is easy but it does require two people to get it straight.

Rubber seal very difficult to install. Packaged nicely. Would have been nice but eliminated access to my hood which has storage, radiated, brakes and other electrical connections.

I'm giving this 3.5 stars, which isn't a choice above. It could easily be a 5 star, but since I've gotten older, I've become more irritated when I don't get what I pay for. This item lost 1 star because it was missing 1 stainless steel metric machine screw. This is not something everyone has just laying around. Even the Chinese junk you buy includes extra screws. For $500 I expect ALL OF THE PARTS! Poor quality control and there is no excuse for this.Be advised, this is a bear to install. I was replacing a JD OEM windshield that had become hard to see through due to sun damage over the past 11 years. I assumed this would install as easy as that one did many years ago. It was not. The bottom piece was very difficult to get installed low enough on the frame to have enough room for the top section. Also, not mentioned anywhere, and I should have known this, once you install the bottom section you cannot access the front storage area on the 825i XUV without removing the window section. So, if you use your storage area, I do not recommend this windshield.I have a JD OEM hardtop that I had to take off to do the install because the top windshield would not go high enough to seat properly against the bottom section. It was pushing up against the top. I was able to reinstall the top afterward and it does push down on the windshield when it is closed. This caused the bottom corners of the top section to slightly lift away from the overlap flange with the bottom section. Two photos show contact with the OEM hardtop when installed. The remaining photos show the top section bowed off of the mating flange/gasket.

High quality materials and compnents. Nice packaging. However there were no instructions included. Online video helped.

We put this on our Gator and it works great. Not a hard install either.