PoolSkim Pool Skimmer and Pool Cleaner

We have an inground that was built to be an infinity pool but the catch basin and plumbing was never completed. (Previous owners). The in-wall skimmer was positioned much too high to be much use so the PoolSkim provided an alternative that has been working well since installing two days ago. The installation took about ten minutes and another five minutes to fine tune the pressure. We have a variable speed pump that makes it easy. Catching everything that comes close. Very good product and I may update in the future as to reliability. ONE MONTH UPDATE: Been in use for a month now and it is as good or better than a regular wall skimmer (this is our fourth pool). Easy to clean and we're now using the skimmer socks also for fine particles. Very impressed so far. UPDATE - ONE YEAR LATER: After the first year in service, the PoolSkim unit has been working perfectly and even the catcher bag has no failures or holes with the unit operating every day since we do not "close" the pool for winter in our climate. This unit has far exceeded our expectations and if you are getting small particulate debris, the skimmer socks in the bag are perfect additions. Great product that even held up during the swim season - just tell the kids that it's not a toy.

I purchased the PoolSkim 2 years ago form Amazon. I have to say it was one of the best $100 bucks I have ever spent!!!! In this day and age of poor quality and false advertising, it is wonderful to find a product that actually performs well and does what it is supposed to do. It has far exceeded my expectations.It attaches to the return on your pool and creates a vortex on the surface of the water that sucks all the surface debris (bugs, leaves, seed pods, etc.) into the attached mesh bag. You simply empty and rinse the bag when it gets full. I have a 27" round pool and I only have to empty the bag about 1 per week, sometimes twice per week in the spring and fall when there are extra leaves and seed pods. It doesn't require any electricity or any sort of attachment to the filter itself. With the PoolSkim, you will never have to manually skim your pool with a net ever again. It works so well that you will be able to vacuum less since it sucks up all the surface garbage before it can sink to the bottom of the pool. It also saves your filter from getting dirty and you will clean your filter less frequently. This past season I only had to vacuum my pool @ every 10 days and even then it wasn't very dirty. I only cleaned my DE filter once during the season and once at closing. The Pool Skim saves you so much work and makes pool maintenance a breeze.I had no trouble installing it. I only had to make one cut in the PVC pipe to get it to fit properly on my return. The entire installation only took me about 30 minutes. I have an above ground pool where the return is fairly close to the surface so that may be why it was an easy installation for me. I know some reviewers said they had difficult time installing it but believe me, once you finally get it installed, it will definitely be worth the effort.I highly recommend the PoolSkim to every pool owner. You will never regret it. You will be so glad that the PoolSkim is now cleaning your pool instead of you.

Was sick of spending quite a bit of time skimming prior to each pool use. Was actually looking for a surface skimming automatic robot (selection appears limited and they appear to be pricey) when I stumbled upon this. Price seemed fair, reviews seemed good, and figured I could send back if didn't work.It works exactly as shown. Creates a little whirlpool that all the floating debris goes into. Most debris are gone w/in 10 minutes and everything (or close to it) is gone within a hour. This thing will save me HOURS every summer.Not hard to install but not a cake walk either, takes a little bit of basic DIY skill. Configuration depends on how low below the water line your jet/return is and also what type of vacuum you have. The installation video on their site is confusing in my opinion, however, I found one YouTube from the manufacturer which made more sense to me. You have 2x 90 degree elbows, 1 45 degree elbow, and a 1ish foot piece of PVC pipe. You may need only 1 90, or only 1 45, or 2 90s + pipe, or 1 90 + pipe + 1 45...may need to angle the pipe upwards, downwards, or somewhere in between, may also need cut the pipe. The water pressure was causing the unit to move at the return threading so it took a little plumber's tape and a pipe wrench to get it snug. The screws need to be really tight as well (probably not a terrible idea to use pvc glue instead of the screws once you are confident with your configuration).Seems pretty sturdy, ridiculously easy to empty the debris bag, works as it should, and eliminates (or almost eliminates) the need to manually skim. If you're tired of manually skimming then this is an absolute must have.