🔭 Elevate Your Aim with Precision!
The UTG Super Slim RDM20 Mount is a precision-engineered accessory designed for Glock double stack pistols. Made from durable 6061-T6 aircraft aluminum, it features a low-profile design for optimal sight alignment and includes all necessary installation tools. With a lifetime warranty, this mount promises reliability and performance for tactical enthusiasts.
| Item Package Dimensions L x W x H | 4.96 x 2.72 x 0.2 inches |
| Package Weight | 0.02 Kilograms |
| Item Weight | 0.53 Ounces |
| Brand Name | UTG |
| Warranty Description | Life Time |
| Model Name | RDM-20GL |
| Color | Black |
| Material | Aluminum |
| Suggested Users | unisex-adult |
| Number of Items | 1 |
| Manufacturer | Leapers, Inc. |
| Part Number | RDM-20GL |
| Style | Dovetail |
| Included Components | Pistol Mount Glock Dovetail Insert,#6-48 T10 Torx Screw 5.5mm Length X3,#6-48 T10 Torx Screw X3,T10 Torx Wrench |
| Size | for Glock Rear Sight |
| Sport Type | Hunting, Tactical & Military |
E**P
Products is good but…
Product is good… looks durable…but I returned it because it kind of looks funky when you put it in the dovetail for a red dot… better to get it custom milled for a red dot !!!
M**W
Works great very low profile!
Fits a glock 19 perfectly. Read a review that it had to be shaved- not so. I have a simple pretty standard sight removal device and it literally took minutes to get the old rear sight off and this on. Made for the utg but I believe most ADE optics mini reflex’s fit if your looking for a cheaper alternative. Mine fit snug as a rug and this has a much slimmer profile and almost makes shaving the slide stupid as this comes on and off so easily and you get to keep your slide. Very happy
S**5
Seems Solid, But There Could Be Installation Issues
This was purchased for a Glock 19 Gen 4, to mount the inexpensive UTG red dot sight. The Glock rear sight is removed, an insert installed into the dovetail slot, and the sight mounting base attached to the insert with two screws. This seems to be a solid platform, and my sight appears to be quite secure when mounted. A slight collar around each hole in the dovetail provides good indexing of the sight base. Mounting screws come with a bit of blue thread locker applied.The potential installation issue is that the insert is extremely tight in the dovetail slot - not much chance that the mount will drift sideways with use. This is similar to, or perhaps tighter than, a replacement sight. Fortunately I already had a sight pusher tool; I would not have been able to tap this insert into place with a mallet and drift punch. An alternative would be to file a bit off the insert, but it is small and may be difficult to work with. The "Ade Advanced Optics Glock Tactical Mini Dotx Sight Pistol Mount Base" (also sold on Amazon) may be a better option for those without sight pushers. My ADE dovetail insert for another Glock pistol fit loosely enough to be easily inserted by hand. The mounting base is slightly curved on the sides, conforming to a stock Glock slide to both capture the insert and to be self-centering. The base mounting screws tighten up the assembly and hold it in place.The UTG mount fits the ADE sight, and the ADE mount accommodates the UTG sight. This seems to be a somewhat "standard" pattern used by Burris, Docter, Vortex, and others.This type of mount can be very good for those who want to experiment with inexpensive red dots before buying higher-end sights and milled slides, though the sight will sit noticeably higher without slide milling. The UTG has been a high quality mount so far.
V**Y
This one works.
This plate was used to mount a Ade RD3-012-G-1 on a Bersa TPR9C. every thing lined up perfectly. I pushed out the rear sight,slipped in the plate,tightened it down,mounted the optic and was done in about 30 minutes. The optic is low,tight and solid. One and done. Thank you UTG! Up date- 2500 rounds fired,problem free,very happy.
D**
Probably OK, can’t hang with 10mm
Easy mount, but wouldn’t hold zero with my 10mm. Probably work ok with 9mm, on my lighter loads, similar to .40 S&W it did fine, but full power 10mm wouldn’t hold zero. These are tack driver loads, and I tested them during the same range session with iron sights, so it is for sure the mount.
S**S
Great mount for M&P Shield
I used this adapter plate to mount an ADE Advanced Optics red dot to an M&P shield and it worked like a charm.The ADE sight has a mount that caused the sight to droop backwards. The M&P shields slide is cut slightly lower behind the rear sight in comparison to the rest of the slide. This adapter plate is machined to take that step in the slide into account.It's an awesome mount, wish I could say the same for the sight.
D**H
Doesn’t fit
Ordered mine for a sig P229 and it does not fit... not sure why but I have a feeling I was sent the wrong unit
O**E
Factory fit
Love that this product is made for your exact make and model of your Pew Pew giving you a factory fit, and a low profile 45 degree offset mount, as well as the pistol mount. Very pleased with it.
A**R
Returned
Did not fit my sight
A**R
Works as advertised - easy install
I can confirm the UTG Super Slim RDM20 mount does fit a Gen 5 Glock 17 and a Vortex Venom. A sight press is highly recommended as it is a tight fit.
H**S
Quick delivery
Did not hold my scope on my gun
D**N
Sturdy
Looks good but I have not tried it on my firearm
G**
Perfect
Mounted UTG 4moa micro red dot on my G17 with this mount and it works awesome. Easy to install.
Trustpilot
2 weeks ago
2 days ago