KRYDEXIPSC USPSA IDPA Competition Shooting Multi-Angle Adjustment Speed Shooter's Pistol Magazine Pouch Mag Holster Holder

These mag holders are vey adjustable, work great, and are quite inexpensive.Installed the included parts to convert to single stack and they work perfectly.

I’ve been using these in uspsa matches for 3 years. They hold up great! I do Recommend using locktite on all of the screws, but i reccomend That on all mag pouches. Helps keep things in place and no fear of losing screws. These are basically the same as the BSG pouches, just way cheaper. I’d say the hold up just the same. If you’re just starting out in the game, these are the pouches for you!

The actual design and quality of these things are awesome! You can adjust it almost any way you want it, to include the type of mags you’re carrying. BUT!!!!!, the little bracket where your belt feeds in to is small. For example, I used it on my 5.11 tac belt which is 1.75 inches wide, and it was too big to fit inside the little notches/lips (whatever they’re called) of the mounting bracket. So I have to cut the notches a tiny bit wide so the belt could fit perfectly snug and I’d be able to screw it down. After it was done however it turned out to be the best set of mag holders I’ve owned!This item could be a 5/5 stars if the company gave you options for sizes on the belt adapter!

I got these to fit on my current battle belt. They did not fit on the competition belt. Ultimately I had to return them. I do recommend getting the whole setup from Krydex. Just to make sure it all fits correctly inappropriately. I can recommend this product! It just did not work out for me. My belt was too thick for the mag holders to fit.

Won't fit on my belt. Not the height, it is the thickness. Belt is 1.5 inch. But the screws for the width adjustment to short for any real adjustment. Highly disappointed, and unhappy. Real pain in the rear to adjust. To many tiny screws and nuts falling out. I guess buy this if your that set on getting the perfect angle height and whatever. Just be ready for a real process of you make any change, if it fits to begin with.Update, got it to fit. Very difficult because the screws are attached to nuts. The screws are short enough that you have to press them on to get them to thread doing so one at a time. Be nice if they were long enough you didn't have to take it apart to get it on the belt. Should I decide to adjust location, it's s huge process. Remove pouch side plates (remove two tiny screws and nuts). Unscrew pouch. Set aside. Remove four screws and nuts (tiny). Move to new location, put it all back in reverse order. You would be tempted to leave them in place they are just because if the headache moving them. If the belt mounting screws were longer you could losen, slide, adjust, tighten. They function well once finally mounted, I'll give it that. That's why the 3 Stars. Would I buy them again? I'm buying another belt, I'm going to find another magazine system. I say system because this is a system, not just holders. Instructions not really needed, but would have been convenient. When mounting leave at least one together to make sure you put it together properly. I recommend buy one, if you can put up with the work involved in adjusting, get more. If not look elsewhere.

I use these for USPSA , SCSA , PCSL and all hit factor matches. No problems as of yet. Had them for 9 months. Easy to use , adjust and install. Will upgrade later as I improve but these are excellent for all levels of shooters. I did personalize them with some custom paint and decals

These are pretty good for the money. Very adjustable and work well for USPSA and steel matches. A bit of a pain to mount as you have to take them half apart but you almost have to do anything and without a mag in them they flex more than I would like but that is to be expected with the versatility these offer. For the price and versatility I dont think you can beat them.

These mag pouches are a fantastic deal with a couple of caveats. I wasn't interested in dropping a ton of money on mag pouches when I first started shooting USPSA matches. So, I decided to give these a try. At such a low cost, I figured the risk was worth it. I have been impressed with their performance and they have never let me down. I do not consider them to be more or less effective than many other expensive brands. However, there are two issues worth considering before you purchase.Initial fitment isn't painless. Other styles you simply latch over your belt and you are ready to go. These guys must be disassembled and then screwed down again on top of your belt. You will also need to adjust the tilt of the mag pouch using an Allen wrench. The spaces and tolerances are a tight fit. It might be difficult for folks with large hands to get this chore done easily. Consider using Loctite to keep your hard work in place.The second issue will only impact smaller framed shooters. In USPSA, a shooter is allowed to carry a considerable number of mag pouches. These pouches are a bit wider than most. This results in the ability to effectively carry more than 3 mag pouches on a smaller sized person. The size and shape of my waist will restrict me to 3 mags instead of 4. If you are average or a larger than average waist size, this shouldn't be an issue.In conclusion, these mag pouches do involve some effort to set up before your first shoot. However, I believe the cost savings to be totally worth the time investment!

Best value for the price, liked the material, hope it can last the rough usage.

Seems well built. Easy to switch to lefty holds glock and smith&wesson mags supper tight but are easy to pull out and put back so There great for speed loading but these are my first mag holders like this so i have no other brands to compare too. I will repost. If they break

These mag holders are affordable knock-offs of high end, competition-oriented holders which can cost 3x+ more per unit. If you are patient and handy with small tools, they can provide a low cost entry into competitive practical shooting sports. They are highly adjustable to a range of magazines and fit most common belt systems (up to 1 1/2” width). Made of plastic, they will not have the lifespan of high end units made of aluminum etc., but until you get into high frequency, intense practice and competition sessions they do the job. You have to spend time adjusting them to fit your mags, dealing with many tiny nuts and screws as others have mentioned (would be nice if company included some spares as they do tend to go walkabout!). Getting them mounted on your belt is also a bit of a pain; once you get them setup you will want to leave them on. As shown in accompanying pictures, I made a couple of mods which improved holders a bit. As they come, mag retention is by friction alone, which changes with use, temperature, etc. You can tighten the top black knobbed bolt down for secure retention, but then mags may be sticky to pull out. I epoxied 3/4” by 1/8” thick rare earth magnets to the inside center of the outer panel of each holder, so the magnet was centered over the fortuitously positioned hole through the inner panel of each holder (silver disc visible in photo). The resulting clearance is perfect for effective mag retention, without any scraping or interference and allows one to reduce the friction screw pressure, giving a secure but slick action. Note some competitions disallow magnet-only holders; it’s not clear if they would rule this system out, but if that ever was an issue one can quickly undue 2 nuts and remove the outer panels with attached magnets and use friction retention alone. Also as seen in photos, I drilled a tiny pair of holes in lower rear corners of each side of holders, and pushed through a 4-40x1” screw, with a piece of black plastic tubing as a spacer (cut to fit my mag thickness), with a nyloc nut on inner end. This addition made the mag holders much more sturdy and stable. Finally, as others have suggested, once I had all the holders adjusted so mags fit well, and got them mounted on the belt at the correct angles (tilting slightly away from belt, and slightly forward works), I applied blue medium threadlock to every nut and bolt (except top friction knob) and retightened everything carefully. Several friends use these holders as well, without modification, and seem happy. They use the holders with Krydex belts which also seem fine. I had a similar but higher-end Black Scorpion belt, on which these customized holders also work well.

I bought a set of 5 for my shadow 2 and I needed assistance in some issues. Will, the person I communicated with resolved the problem. After sales is very important to me, to any customer. I highly recommend this product to new sports shooters.

These work awesome. I’m no competition shooter but I’ve ran my mags through them a ton and they have held up perfectly. They showed up exactly as they were advertised. Fast shipping as well!