Universal Halogen Oven Cooker Heating Element Bulb with 3X Clips & Ceramic Connector (1200/1400w)-22CM LEADS-S4U®

The media could not be loaded. My Halogen Oven bulb stopped working and I decided to try and replace. My JML oven is quite an old one unlike the new ones which now have a slot to change bulb. This bulb was an execellent choice and great value for money as you get the bulb, new clips and the ceramic block which makes it so much easier. Firstly my advice check Youtube for help as it has step to step help. You unscrew the main fan and side clips and the first cover comes off. Take the inner fan off and loosen the next screws but no need to unscrew completely. Cut the wire off old bulb leaving enough to join using the ceramic block. Gently connect the wires to block and just slip it under the loosened cover. No need to screw it or attach as it sits nicely underneath. Put everything back and hey presto a new working Halogen Oven. I’ve used it several times and it’s fine for under 10 pounds a repaired Halogen Oven. I am so pleased as my oven cost me over £80 at the time and repaired for a Tena.Advice: measure bulb size of old one. Secondly if unsure take a photo of each section so you know where all goes. I highly recommend you having a go rather then buy a new oven.

Instructions are not included but a straight forward operation remembering not to touch the bulb with your bare hands. If you do the bulb will blow when current is applied.I would suggest watching a video on you tube if you are not used to this work or ask a professional if preferred. The product is very good but fiddly to fit.

used to fix my 17 litre Daewoo oven which was out of its two year guarantee.As simple as rewiring a 3 pin plug, all you need is 30mins, a crosshead screwdriver, and something to strip/cut 4 wires ( pliers, cutters, hobby knife or even scissors would do ). There are vids on youtube, I positioned the supplied connection block on the outside of the heater guard, as inside seemed a bit tight.Saved at least a fifth of the price of a new oven, plus saves sending more fixable stuff into landfill.

Worked a treat so didn't need to buy a new halogen oven.

Bulb is the correct size but very difficult to fit in the Andrew James hinged lid halogen oven. Really could do with a plug. Supplied connector is far too large in this instance and will not go through cover. Re adapted the old plug and managed to get the oven working.

good buy

I purchased this for the second time in January 2025 for a newer halogen oven where that blub had gone and once securely fitted, it lasted only 5 days. I have not replaced it since, instead I have been using my cooker rather than waste money.

Do not attempt to fit yourself you always miss something LOL